Riser Clamp

PURPOSE

Used for mounting of pipes to the walls(vertical/horizontal) ceilings and floors

GENERAL PROPERTIES

Permits installation before and after pipe is in place

Easy and safe assembly through combi side screws

Side screws are protected against loss during assembly with the help of plastic washers

CONSTRUCTION

Consists of piece carbon steel shaped to wrap around the pipe

MATERIALS

Carbon Steel and any other materials can also be provided upon request

TEMPERATURE

Maximum Temperature 343°C

APPROVALS

Manufactured to follow specifications MSS SP-69 &SP-58 Type 58

FINISH AVAILABLE

Plain, Electro-Galvanized, Hot Dip Galvanized

APPLICATION

RISER CLAMPS are recommended for the support and/or restraint of vertical steel pipes. A RISER CLAMP is designed to attach to the pipe and to rest on a structural member or floor; it is not designed to have hanger rods attached to it to support the pipe.

CONSTRUCTION

RISER CLAMPS consists of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load.

MATERIALS

Carbon Steel and any other materials can also be provided upon request

APPROVALS

Manufactured to follow specifications MSS SP-69 & SP-58 Type 8

FINISH AVAILABLE

Plain, Electro-Galvanized, Hot Dip Galvanized

TEMPERATURE

Maximum Temperature is 343°C