PURPOSE
Designed to suspend non-insulated stationary pipes and Sprinkler system installation
INSTALLATION
Vertical adjustments are possible once the pipe is in place. The lower nut is used to
adjust the pipeline to the required elevation. The top nut must securely be tightened to assure proper
performance of hanger after adjustment
CONSTRUCTION
Consists of a piece of carbon steel shaped to support pipe. Gives Double thickness at the
support. Most suitable for fire extinguishing pipes installation
MATERIALS
Carbon Steel and any other materials can be provided upon request
APPROVALS
Manufactured to follow specifications MSS SP-69 & SP-58 Type 10
Manufactured to Comply with NFPA 13
FINISH
Plain, Electro-Galvanized, Hot Dip Galvanized
MAXIMUM TEMPERATURE
343°C
Sprinkler Hanger without a Nut
Designed to suspend non-insulated stationary pipes and Sprinkler system installation
Consists of a piece of carbon steel shaped to support pipe. Gives Double thickness at the support. Most suitable for fire extinguishing pipes installation
Galvanized Carbon Steel and any other materials can also be provided upon request
Manufactured to follow specifications MSS SP-69 & SP-58 Type 10
Manufactured to Comply with NFPA 13
Plain, Electro-Galvanized, Hot Dip Galvanized
343°C
Tap to View Data Sheet
Access detailed project specifications and technical data here
Data Sheet
Note: 1 KN (mass) = 101.97 KG