PURPOSE
Used for mounting of pipes to the walls(vertical/horizontal) ceilings and floors
Permits installation before and after pipe is in place.
Lining for:
Noise reduction level up to 15 db.
Vibration reduction.
Partial compensation of thermal expansion.
CONSTRUCTION
Consists of piece carbon steel shaped to wrap around the pipe, made from shaped carbon steel plate. The selection of the proper pipe hanger with Epdm lining depends upon the temperature of the piping system and load to be carried
MATERIALS
Carbon Steel. Any other materials can also be provided upon request
TEMPERATURE
-20°C to 110°C
APPROVALS
Manufactured to follow specifications MSS SP-69 & SP-58 Type12
FINISH AVAILABLE
Plain, Electro-Galvanized, Hot Dip Galvanized
Pipe Clamp with Epdm Lining
PIPE HANGER WITH LINING is recommended for non-insulated
stationary pipelines in a horizontal position. It can be use for
supporting pipes along roof
PIPE clamp with lining consists of piece carbon steel shaped
to wrap around the pipe, made from shaped carbon steel
plate. The selection of the proper PIPE HANGER WITH EPDM
LINING depends upon the temperature of the piping system
and load to be carried. Permits installation before and after
pipe is in place. Reduces noise upto 18 dB
alloy steel and any other materials can also be provided upon request
Manufactured to follow specifications MSS SP-69 & SP-58 Type12
Plain, Electro-Galvanized, Hot Dip Galvanized or epoxy
coating
-20°C to110°C
Tap to View Data Sheet
Access detailed project specifications and technical data here
Data Sheet
Note: 1 KN (mass) = 101.97 KG