PURPOSE
Used for mounting of pipes to the walls(vertical/horizontal) ceilings and floors
GENERAL PROPERTIES
Permits installation before and after pipe is in place
Easy and safe assembly through combi side screws
Side screws are protected against loss during assembly with the help of plastic washers
CONSTRUCTION
Consists of piece carbon steel shaped to wrap around the pipe
MATERIALS
Carbon Steel and any other materials can also be provided upon request
TEMPERATURE
Maximum Temperature 343°C
APPROVALS
Manufactured to follow specifications MSS SP-69 & SP-58 Type 58
FINISH AVAILABLE
Plain, Electro-Galvanized, Hot Dip Galvanized
Riser Clamp - Four Bolts
recommended for the support and/or restraint of vertical steel pipes.
designed to attach to the pipe and to rest on a structural member or floor; it is not designed to have hanger rods attached to it to support the pipe.
RISER CLAMPS consists of two carbon steel flat bars bent to shape and held together by two bolts. Designed to act as a rigid support or guide for vertical pipes. The clamp should be bolted to the pipe just below support lugs or other attachments that can carry a shear load.
Carbon Steel and any other materials can also be provided upon request
Manufactured to follow specifications MSS SP-69 & SP-58 Type 42
Plain, Electro-Galvanized, Hot Dip Galvanized or epoxy coating
343°C
Tap to View Data Sheet
Access detailed project specifications and technical data here
Data Sheet
